The material of the filter cloth is generally polyester […]
The material of the filter cloth is generally polyester, polypropylene and vinylon. These are identified by the relevant health departments and used in the food and pharmaceutical industries without side effects on human health; the food and pharmaceutical industries should be rinsed with warm water before use to avoid the introduction of dirt on the cloth ; When cutting the filter cloth, it is better to use an electric iron to iron (using a 1500W electric iron) to prevent the warp and weft from loosening. The sewing thread must use the same performance thread; after the filter cloth is used, if the cloth hole is blocked by the dross and the cloth body is hardened to affect the filtering speed, acetone, oxalic acid, toluene, caustic soda, alcohol and other solutions can be selected according to various fiber properties. Soaking, cleaning (washing), (concentration depends on the situation) can make the cloth body soft, restore the hydrophobicity and breathability of the filter cloth, and increase the use rate of the filter cloth.filter press filter cloth Manufacturers
When the filter cloth is used, the two sides should be flattened and the tie is placed above the filter plate. The two front and back of the filter cloth tied with the tie are flat to cover the filter plate; roll one of the filter cloth into a slender (tube Shape), and then pass through the feed port in the middle of the filter plate of the filter press; check whether the feed (out) hole on the filter cloth is aligned with the filter plate.